Model (Euromap Platen Information) |
VR-550R |
||||
---|---|---|---|---|---|
Injection Unit |
|||||
Calculated injection capacity | cm3 | 2010 | 2544 | 3141 | |
Actual shot weight - PS | grams | 1884 | 2385 | 2944 | |
Actual shot weight - PS | oz | 66.4 | 84.1 | 103.8 | |
Calculated Plasticizing Capacity - PS | g/s | 82 | 113 | 154 | |
Injection pressure-Max. | kgf/cm2 | 2252 | 1779 | 1441 | |
Injection Rate | cm3/sec | 439 | 555 | 686 | |
Injection speed | mm/sec | 87 | |||
Screw diameter | mm | 80 | 90 | 100 | |
Screw L/D ratio ※(1) | 23 | 20.5 | 18.5 | ||
Max. Theoretical screw torque | N.m | 4942 | |||
Screw speed | rpm | 167 | |||
Screw stroke | mm | 400 | |||
Nozzle stroke | mm | 530 | |||
Nozzle contact force | ton | 10.8 | |||
Temperature control zones | no. | 6 | |||
Total heating wattage | Kw | 32 | |||
Clamping Unit |
|||||
Clamping force | ton | 550 | |||
Clamp stroke-Max. | mm | 850 | |||
Open daylight-Max. | mm | 1800 | |||
Mold thickness (Min-Max.) | mm | 300-950 | |||
Platen dimension (H×V) | mm | 1260×1260 | |||
Tie-bar distance(H×V) | mm | 850×850 | |||
Ejector stroke | mm | 220 | |||
Ejector force | ton | 11 | |||
Dry cycle time | sec | 4.5 | |||
General |
|||||
Motor power (Standard) | HP(Kw) | 75(55.9) | |||
Servo motor power (ES Option) Max. Flow | Kw | 15 + 18 + 22.5 | |||
Oil tank capacity (Standard) | L | 960 | |||
Oil tank capacity (ES system Option) | L | 750 | |||
Hydraulic sys. pressure | Kg/cm2 | 140 | |||
Machine Weight | ton | 27.5 | |||
Machine dimensions (Standard) | mm | 9290x2150x2596 | |||
Machine dimensions (ES System option) | mm | 9650×2150×2596 | |||
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(*20), 20(*22), 22(*24)) Optional special for houshold produce. |
Model (SPI Platen Information) |
VR-550R |
||||
---|---|---|---|---|---|
Injection Unit | |||||
Calculated injection capacity | in3 | 122.66 | 155.25 | 191.68 | |
Actual shot weight - PS | grams | 1884 | 2385 | 2944 | |
Actual shot weight - PS | oz | 66.4 | 84.1 | 103.8 | |
Calculated Plasticizing Capacity - PS | g/s | 82 | 113 | 154 | |
Injection pressure-Max. | kgf/in2 | 32030 | 25302 | 20495 | |
Injection Rate | in3/sec | 26.79 | 33.87 | 41.86 | |
Injection speed | in/sec | 3.42 | |||
Screw diameter | in | 3.15 | 3.53 | 3.94 | |
Screw L/D ratio ※(1) | 23 | 20.5 | 18.5 | ||
Max. Theoretical screw torque | N.m | 4942 | |||
Screw speed | rpm | 167 | |||
Screw stroke | in | 15.74 | |||
Nozzle stroke | in | 20.86 | |||
Nozzle contact force | ton | 11.9 | |||
Temperature control zones | no. | 6 | |||
Total heating wattage | Kw | 32 | |||
Clamping Unit | |||||
Clamping force | ton | 606 | |||
Clamp stroke-Max. | in | 33.46 | |||
Open daylight-Max. | in | 70.86 | |||
Mold thickness (Min-Max.) | in | 11.8 - 37.4 | |||
Platen dimension (H×V) | in | 49.6 × 49.6 | |||
Tie-bar distance(H×V) | in | 33.4 × 33.4 | |||
Ejector stroke | in | 8.6 | |||
Ejector force | ton | 12.1 | |||
Dry cycle time | sec | 4.5 | |||
General | |||||
Motor power (Standard) | HP(Kw) | 75(55.9) | |||
Servo motor power (ES Option) Max. Flow | Kw | 15 + 18 + 22.5 | |||
Oil tank capacity (Standard) | L | 960 | |||
Oil tank capacity (ES system Option) | L | 750 | |||
Hydraulic sys. pressure | Kg/in2 | 1991 | |||
Machine Weight | ton | 30.3 | |||
Machine dimensions (Standard) | in | 365.7×84.6×102.2 | |||
Machine dimensions (ES System option) | in | 379.9×84.6×102.2 | |||
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(*20), 20(*22), 22(*24)) Optional special for houshold produce. |