Home > Prodcuts > VR-Series (CE)

Precision built, high speed PIM machinery

VR-350 Tons / VR-450 Tons / VR-550 Tons / VR-700 Tons / VR-850 Tons / VR-1000 Tons / VR-1300 Tons

Victor Taichung introduces to you, the new VR series of Plastic Injection Moulding machinery. With a tonnage of 350-850 tons and using the advanced V-8000C controller and semi-closed looped hydraulic system, the new VR-range can match your requirements of quality, high-speed production and precision moulding.

Heavy Duty, Rigid, Clamping Unit
Energy Saving Precision Hydraulic System
The V-8000C Semi-Closed Loop Controller
The advanced controller V-8000C series

Vr-Series (CE) - All model (Euromap Platen Information)

Model		VR-350F			VR-350E			VR-350N
Injection Unit
Calculated injection capacity	cm³	332	392	475	570	678	871	946	1160	1432
Actual shot weight - PS	grams	312	368	445	534	636	817	886	1087	1342
Actual shot weight - PS	oz	11	13	15.7	18.9	22.4	28.8	31.3	38.4	47.4
Calculated Plasticizing Capacity - PS	g/s	48	59	74	52	64	86	46	57	75
Injection pressure-Max.	kgf/cm²	2117	1792	1481	1944	1633	1272	1988	1620	1313
Injection Rate	cm3/sec	357	422	511	389	463	595	333	408	504
Injection speed	mm/sec	215			163			100
Screw diameter	mm	46	50	55	55	60	68	65	72	80
Screw L/D ratio ※(1)		22	20	18	22	20	18	23	21	19
Max. Theoretical screw torque	N.m	1504			2212			3668
Screw speed	rpm	400			286			172
Screw stroke	mm	200			240			285
Nozzle stroke	mm	380			450			530
Nozzle contact force	ton	4.7			7.4			10.8
Temperature control zones	no.	4			4			5
Total heating wattage	Kw	12.95			18.6			26
Clamping Unit
Clamping force	ton	350			350			350
Clamp stroke-Max.	mm	660			660			660
Open daylight-Max.	mm	1360			1360			1360
Mold thickness (Min-Max.)	mm	250-700			250-700			250-700
Platen dimension (H×V)	mm	1080×1080			1080×1080			1080×1080
Tie-bar distance(H×V)	mm	700×700			700×700			700×700
Ejector stroke	mm	160			160			160
Ejector force	ton	8.9			8.9			8.9
Dry cycle time	sec	3.6			3.6			3.6
General
Motor power (Standard)	HP(Kw)	60(44.4)			60(44.4)			60(44.4)
Servo motor power (ES Option) Max. Flow	Kw	18 + 22.5			18 + 22.5			18 + 22.5
Oil tank capacity (Standard)	L	740			740			740
Oil tank capacity (ES system Option)	L	510			510			510
Hydraulic sys. pressure	Kg/cm2	160			160			140
Machine Weight	ton	17			17			17
Machine dimensions (Standard)	mm	7475x1900x2440			7475x1900x2440			7475x1900x2440
Machine dimensions (ES System option)	mm	7835×1950×2440			7835×1950×2440			7835×1950×2440
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-450E			VR-450N			VR-450P
Injection Unit
Calculated injection capacity	cm³	570	678	871	946	1160	1432	1343	1659	2099
Actual shot weight - PS	grams	534	636	817	886	1087	1342	1259	1554	1967
Actual shot weight - PS	oz	18.9	22.4	28.8	31.3	38.4	47.4	44.4	54.8	60
Calculated Plasticizing Capacity - PS	g/s	52	65	87	46	57	75	51	67	91
Injection pressure-Max.	kgf/cm²	1944	1633	1272	1988	1620	1313	2019	1635	1292
Injection Rate	cm3/sec	389	463	595	333	408	504	328	405	512
Injection speed	mm/sec	163			100			80
Screw diameter	mm	55	60	68	65	72	80	72	80	90
Screw L/D ratio ※(1)		22	20	18	23	21	19	22	20	18
Max. Theoretical screw torque	N.m	2212			3668			4536
Screw speed	rpm	286			172			139
Screw stroke	mm	240			285			330
Nozzle stroke	mm	450			530			530
Nozzle contact force	ton	7.4			10.8			10.8
Temperature control zones	no.	4			5			5
Total heating wattage	Kw	18.6			26			30
Clamping Unit
Clamping force	ton	450			450			450
Clamp stroke-Max.	mm	760			760			760
Open daylight-Max.	mm	1580			1580			1580
Mold thickness (Min-Max.)	mm	300-820			300-820			300-820
Platen dimension (H×V)	mm	1200×1200			1200×1200			1200×1200
Tie-bar distance(H×V)	mm	780×780			780×780			780×780
Ejector stroke	mm	180			180			180
Ejector force	ton	9.9			9.9			9.9
Dry cycle time	sec	4.1			4.1			4.1
General
Motor power (Standard)	HP(Kw)	60(44.4)			60(44.4)			60(44.4)
Servo motor power (ES Option) Max. Flow	Kw	18 + 22.5			18 + 22.5			18 + 22.5
Oil tank capacity (Standard)	L	960			960			960
Oil tank capacity (ES system Option)	L	750			750			750
Hydraulic sys. pressure	Kg/cm2	160			140			140
Machine Weight	ton	21			21			21
Machine dimensions (Standard)	mm	8385x2050x2353			8385x2050x2353			8385x2050x2353
Machine dimensions (ES System option)	mm	8745×2050×2353			8745×2050×2353			8745×2050×2353
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-550N			VR-550P			VR-550R
Injection Unit
Calculated injection capacity	cm³	946	1160	1432	1343	1659	2099	2010	2544	3141
Actual shot weight - PS	grams	886	1087	1342	1259	1554	1967	1884	2385	2944
Actual shot weight - PS	oz	31.3	38.4	47.4	44.4	54.8	69.4	66.4	84.1	103.8
Calculated Plasticizing Capacity - PS	g/s	63	78	103	69	92	125	82	113	154
Injection pressure-Max.	kgf/cm²	1988	1620	1313	2019	1635	1292	2252	1779	1441
Injection Rate	cm3/sec	435	534	659	428	529	669	439	555	686
Injection speed	mm/sec	131			105			87
Screw diameter	mm	65	72	80	72	80	90	80	90	100
Screw L/D ratio ※(1)		23	21	19	22	20	18	23	20.5	18.5
Max. Theoretical screw torque	N.m	3668			4536			4942
Screw speed	rpm	225			182			167
Screw stroke	mm	285			330			400
Nozzle stroke	mm	530			530			530
Nozzle contact force	ton	10.8			10.8			10.8
Temperature control zones	no.	5			5			6
Total heating wattage	Kw	26			30			32
Clamping Unit
Clamping force	ton	550			550			550
Clamp stroke-Max.	mm	850			850			850
Open daylight-Max.	mm	1800			1800			1800
Mold thickness (Min-Max.)	mm	300-950			300-950			300-950
Platen dimension (H×V)	mm	1260×1260			1260×1260			1260×1260
Tie-bar distance(H×V)	mm	850×850			850×850			850×850
Ejector stroke	mm	220			220			220
Ejector force	ton	11			11			11
Dry cycle time	sec	4.5			4.5			4.5
General
Motor power (Standard)	HP(Kw)	75(55.9)			75(55.9)			75(55.9)
Servo motor power (ES Option) Max. Flow	Kw	15 + 18 + 22.5			15 + 18 + 22.5			15 + 18 + 22.5
Oil tank capacity (Standard)	L	960			960			1100
Oil tank capacity (ES system Option)	L	750			750			700
Hydraulic sys. pressure	Kg/cm2	140			140			140
Machine Weight	ton	27.5			27.5			27.5
Machine dimensions (Standard)	mm	9290x2150x2596			9290x2150x2596			9290x2150x2596
Machine dimensions (ES System option)	mm	9650×2150×2596			9650×2150×2596			9650×2150×2596
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-700N			VR-700P			VR-700R
Injection Unit
Calculated injection capacity	cm³	946	1160	1432	1343	1659	2099	2010	2544	3141
Actual shot weight - PS	grams	886	1087	1342	1259	1554	1967	1884	2385	2944
Actual shot weight - PS	oz	31.3	38.4	47.4	44.4	54.8	69.4	66.4	84.1	103.8
Calculated Plasticizing Capacity - PS	g/s	63	78	103	69	92	125	82	113	154
Injection pressure-Max.	kgf/cm²	1988	1620	1313	2019	1635	1292	2252	1779	1441
Injection Rate	cm3/sec	435	534	659	428	529	669	439	555	686
Injection speed	mm/sec	131			105			87
Screw diameter	mm	65	72	80	72	80	90	80	90	100
Screw L/D ratio ※(1)		23	21	19	22	20	18	23	20.5	18.5
Max. Theoretical screw torque	N.m	3668			4536			4942
Screw speed	rpm	225			182			167
Screw stroke	mm	285			330			400
Nozzle stroke	mm	530			530			530
Nozzle contact force	ton	10.8			10.8			10.8
Temperature control zones	no.	5			5			6
Total heating wattage	Kw	26			30			32
Clamping Unit
Clamping force	ton	700			700			700
Clamp stroke-Max.	mm	930			930			930
Open daylight-Max.	mm	1830			1830			1830
Mold thickness (Min-Max.)	mm	400~1000			400~1000			400~1000
Platen dimension (H×V)	mm	1460X1460			1460X1460			1460X1460
Tie-bar distance(H×V)	mm	960X960			960X960			960X960
Ejector stroke	mm	260			260			260
Ejector force	ton	15			15			15
Dry cycle time	sec	5.5			5.5			5.5
General
Motor power (Standard)	HP(Kw)	75(55.9)			75(55.9)			75(55.9)
Servo motor power (ES Option) Max. Flow	Kw	15 + 18 + 22.5			15 + 18 + 22.5			15 + 18 + 22.5
Oil tank capacity (Standard)	L	910			910			910
Oil tank capacity (ES system Option)	L	910			910			910
Hydraulic sys. pressure	Kg/cm2	140			140			140
Machine Weight	ton	32.5			33.3			33.9
Machine dimensions (Standard)	mm	9936x2290x2600			9936x2290x2600			9936x2290x2600
Machine dimensions (ES System option)	mm	9936x2290x2600			9936x2290x2600			9936x2290x2600
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-850P			VR-850R			VR-850S
Injection Unit
Calculated injection capacity	cm³	1343	1659	2099	2010	2544	3141	2990	3691	4466
Actual shot weight - PS	grams	1259	1554	1967	1884	2385	2944	2802	3459	4186
Actual shot weight - PS	oz	44.4	54.8	69.4	66.4	84.1	103.8	98.9	122	147.6
Calculated Plasticizing Capacity - PS	g/s	90	119	162	107	146	200	98	129	165
Injection pressure-Max.	kgf/cm²	2019	1635	1292	2252	1779	1441	2108	1707	1411
Injection Rate	cm3/sec	557	688	871	571	722	892	534	659	798
Injection speed	mm/sec	137			113			83
Screw diameter	mm	72	80	90	80	90	100	90	100	110
Screw L/D ratio ※(1)		22	20	18	23	20.5	18.5	22	20	18
Max. Theoretical screw torque	N.m	4536			4942			7140
Screw speed	rpm	237			217			146
Screw stroke	mm	330			400			470
Nozzle stroke	mm	530			530			700
Nozzle contact force	ton	10.8			10.8			12.5
Temperature control zones	no.	5			6			7
Total heating wattage	Kw	30			32			52
Clamping Unit
Clamping force	ton	850			850			850
Clamp stroke-Max.	mm	1000			1000			1000
Open daylight-Max.	mm	2100			2100			2100
Mold thickness (Min-Max.)	mm	450~1100			450~1100			450~1100
Platen dimension (H×V)	mm	1560X1500			1560X1500			1560X1500
Tie-bar distance(H×V)	mm	1100X1000			1100X1000			1100X1000
Ejector stroke	mm	260			260			260
Ejector force	ton	18			18			18
Dry cycle time	sec	6.1			6.1			6.1
General
Motor power (Standard)	HP(Kw)	100(74.6)			100(74.6)			100(74.6)
Servo motor power (ES Option) Max. Flow	Kw	18+18+18+18			18+18+18+18			18+18+18+18
Oil tank capacity (Standard)	L	1160			1160			1160
Oil tank capacity (ES system Option)	L	1160			1160			1160
Hydraulic sys. pressure	Kg/cm2	140			140			140
Machine Weight	ton	35.6			37.3			40.8
Machine dimensions (Standard)	mm	10812x2500x2703			10812x2500x2703			10812x2500x2703
Machine dimensions (ES System option)	mm	10812x2500x2703			10812x2500x2703			10812x2500x2703
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-1000R			VR-1000S			VR-1000J
Injection Unit
Calculated injection capacity	cm³	2010	2544	3141	2990	3691	4466	4319	5226	6220
Actual shot weight - PS	grams	1973	2270	2802	2840	3506	4243	4103	4964	5909
Actual shot weight - PS	oz	63	80	98.8	100	124	150	145	175.1	208.4
Calculated Plasticizing Capacity - PS	g/s	134	183	251	122	162	206	111	142	196
Injection pressure-Max.	kgf/cm²	1971	1557	1262	2108	1707	1411	2150	1777	1493
Injection Rate	cm3/sec	724	916	1131	677	836	1012	664	803	1099
Injection speed	mm/sec	144			106			84
Screw diameter	mm	80	90	100	90	100	110	100	110	120
Screw L/D ratio ※(1)		22	20	18	22	20	18	22	20	18
Max. Theoretical screw torque	N.m	4942			7140			8649
Screw speed	rpm	220			188			150
Screw stroke	mm	400			470			550
Nozzle stroke	mm	530			700			850
Nozzle contact force	ton	10.8			12.5			15
Temperature control zones	no.	6			7			7
Total heating wattage	Kw	32			52			65
Clamping Unit
Clamping force	ton	1000			1000			1000
Clamp stroke-Max.	mm	1200			1200			1200
Open daylight-Max.	mm	2400			2400			2400
Mold thickness (Min-Max.)	mm	500-1200			500-1200			500-1200
Platen dimension (H×V)	mm	1820x1715			1820x1715			1820x1715
Tie-bar distance(H×V)	mm	1250x1100			1250x1100			1250x1100
Ejector stroke	mm	300			300			300
Ejector force	ton	23			23			23
Dry cycle time	sec	7.3			7.3			7.3
General
Motor power (Standard)	HP(Kw)	120(89.5)			120(89.5)			120(89.5)
Servo motor power (ES Option) Max. Flow	Kw	18+18+18+18+18			18+18+18+18+18			18+18+18+18+18
Oil tank capacity (Standard)	L	1800			1800			1800
Oil tank capacity (ES system Option)	L	1532			1530			1530
Hydraulic sys. pressure	Kg/cm2	140			140			140
Machine Weight	ton	56.3			57			58.8
Machine dimensions (Standard)	mm	12890x3505x3090			12890x3505x3090			12890x3505x3090
Machine dimensions (ES System option)	mm	12890x3505x3090			12890x3505x3090			12890x3505x3090
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-1300S			VR-1300J			VR-1300B
Injection Unit
Calculated injection capacity	cm³	2990	3691	4466	4319	5226	6220	5701	6785	7963
Actual shot weight - PS	grams	2840	3506	4243	4103	4964	5909	5416	6445	7564
Actual shot weight - PS	oz	100	124	150	144.7	175.1	208.4	191	227.3	266.8
Calculated Plasticizing Capacity - PS	g/s	145	191	244	132	168	232	148	183	227
Injection pressure-Max.	kgf/cm²	2108	1707	1411	2105	1777	1493	2085	1752	1493
Injection Rate	cm3/sec	774	956	1157	759	919	1093	783	932	1094
Injection speed	mm/sec	121			96			82
Screw diameter	mm	90	100	110	100	110	120	110	120	130
Screw L/D ratio ※(1)		22	20	18	22	20	18	22	20	18
Max. Theoretical screw torque	N.m	7140			8694			10290
Screw speed	rpm	200			180			150
Screw stroke	mm	470			550			600
Nozzle stroke	mm	700			850			1080
Nozzle contact force	ton	12.5			15			15
Temperature control zones	no.	7			7			8
Total heating wattage	Kw	52			65			77
Clamping Unit
Clamping force	ton	1300			1300			1300
Clamp stroke-Max.	mm	1300			1300			1300
Open daylight-Max.	mm	2600			2600			2600
Mold thickness (Min-Max.)	mm	550-1300			550-1300			550-1300
Platen dimension (H×V)	mm	1990x1925			1990x1925			1990x1925
Tie-bar distance(H×V)	mm	1320x1280			1320x1280			1320x1280
Ejector stroke	mm	330			330			330
Ejector force	ton	26			26			26
Dry cycle time	sec	8.1			8.1			8.1
General
Motor power (Standard)	HP(Kw)	150(111.9)			150(111.9)			150(111.9)
Servo motor power (ES Option) Max. Flow	Kw	18+18+18+18+18+18			18+18+18+18+18+18			18+18+18+18+18+18
Oil tank capacity (Standard)	L	2100			2100			2100
Oil tank capacity (ES system Option)	L	1750			1750			1750
Hydraulic sys. pressure	Kg/cm2	140			140			140
Machine Weight	ton	71.9			73.6			76.4
Machine dimensions (Standard)	mm	14550x3905x3242			14550x3905x3242			14550x3905x3242
Machine dimensions (ES System option)	mm	14550x3905x3242			14550x3905x3242			14550x3905x3242
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Vr-Series (CE) - All model (SPI Platen Information)

Model		VR-350F			VR-350E			VR-350N
Injection Unit
Calculated injection capacity	in³	20.26	23.92	28.98	34.78	41.37	53.15	57.73	70.79	87.39
Actual shot weight - PS	grams	312	368	445	534	636	817	886	1087	1342
Actual shot weight - PS	oz	11	13	15.7	18.9	22.4	28.8	31.3	38.4	47.4
Calculated Plasticizing Capacity - PS	g/s	48	59	74	52	64	86	46	57	75
Injection pressure-Max.	Psi	30110	25487	21064	27649	23226	18091	28275	23041	18674
Injection Rate	in³/sec	21.78	25.75	31.18	23.73	28.25	36.31	20.23	24.89	30.75
Injection speed	in/sec	8.46			6.41			3.93
Screw diameter	in	1.81	1.96	2.16	2.16	2.36	2.67	2.56	2.83	3.15
Screw L/D ratio ※(1)		22	20	18	22	20	18	23	21	19
Max. Theoretical screw torque	N.m	1504			2212			3668
Screw speed	rpm	400			286			172
Screw stroke	in	7.87			9.44			11.22
Nozzle stroke	in	14.96			17.71			20.86
Nozzle contact force	U.S ton	5.18			8.15			11.9
Temperature control zones	No.	4			4			5
Total heating wattage	Kw	12.95			18.6			26
Clamping Unit
Clamping force	U.S ton	385			385			385
Clamp stroke-Max.	in	25.98			25.98			25.98
Open daylight-Max.	in	53.54			53.54			53.54
Mold thickness (Min-Max.)	in	9.8 - 27.5			9.8 - 27.5			9.8 - 27.5
Platen dimension (H×V)	in	42.5 × 42.5			42.5 × 42.5			42.5 × 42.5
Tie-bar distance(H×V)	in	27.6 × 27.6			27.6 × 27.6			27.6 × 27.6
Ejector stroke	in	6.2			6.2			6.2
Ejector force	U.S ton	9.8			9.8			9.8
Dry cycle time	sec	3.6			3.6			3.6
General
Motor power (Standard)	HP(Kw)	60(44.4)			60(44.4)			60(44.4)
Servo motor power (ES Option) Max. Flow	Kw	18 + 22.5			18 + 22.5			18 + 22.5
Oil tank capacity (Standard)	L	740			740			740
Oil tank capacity (ES system Option)	L	510			510			510
Hydraulic sys. pressure	Psi	2275			2275			1991
Machine Weight	U.S ton	18.7			18.7			18.7
Machine dimensions (Standard)	in	294.3×76.8×96.1			294.3×76.8×96.1			294.3×76.8×96.1
Machine dimensions (ES System option)	in	308.5×76.8×96.1			308.5×76.8×96.1			308.5×76.8×96.1
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-450E			VR-450N			VR-450P
Injection Unit
Calculated injection capacity	in³	34.78	41.37	53.15	57.73	70.79	87.39	81.96	101.24	128.09
Actual shot weight - PS	grams	534	636	817	886	1087	1342	1259	1554	1967
Actual shot weight - PS	oz	18.9	22.4	28.8	31.3	38.4	47.4	44.4	54.8	60
Calculated Plasticizing Capacity - PS	g/s	52	65	87	46	57	75	51	67	91
Injection pressure-Max.	Psi	27649	23226	18091	28275	23041	18674	28716	23254	18376
Injection Rate	in³/sec	23.73	28.25	36.31	20.23	24.89	30.75	20.01	24.71	31.24
Injection speed	in/sec	6.41			3.93			3.14
Screw diameter	in	2.16	2.36	2.67	2.56	2.83	3.15	2.83	3.15	3.54
Screw L/D ratio ※(1)		22	20	18	23	21	19	22	20	18
Max. Theoretical screw torque	N.m	2212			3668			4536
Screw speed	rpm	286			172			139
Screw stroke	in	9.44			11.22			12.99
Nozzle stroke	in	17.71			20.86			20.86
Nozzle contact force	U.S ton	8.15			11.9			11.9
Temperature control zones	No.	4			5			5
Total heating wattage	Kw	18.6			26			30
Clamping Unit
Clamping force	U.S ton	496			496			496
Clamp stroke-Max.	in	29.92			29.92			29.92
Open daylight-Max.	in	62.2			62.2			62.2
Mold thickness (Min-Max.)	in	11.8 - 32.2			11.8 - 32.2			11.8 - 32.2
Platen dimension (H×V)	in	47.2 × 47.2			47.2 × 47.2			47.2 × 47.2
Tie-bar distance(H×V)	in	30.7 × 30.7			30.7 × 30.7			30.7 × 30.7
Ejector stroke	in	7			7			7
Ejector force	U.S ton	10.9			10.9			10.9
Dry cycle time	sec	4.1			4.1			4.1
General
Motor power (Standard)	HP(Kw)	60(44.4)			60(44.4)			60(44.4)
Servo motor power (ES Option) Max. Flow	Kw	18 + 22.5			18 + 22.5			18 + 22.5
Oil tank capacity (Standard)	L	960			960			960
Oil tank capacity (ES system Option)	L	750			750			750
Hydraulic sys. pressure	Psi	2275			1991			1991
Machine Weight	U.S ton	23.1			23.1			23.1
Machine dimensions (Standard)	in	330.1×80.7×92.6			330.1×80.7×92.6			330.1×80.7×92.6
Machine dimensions (ES System option)	in	344.3×80.7×92.6			344.3×80.7×92.6			344.3×80.7×92.6
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-550N			VR-550P			VR-550R
Injection Unit
Calculated injection capacity	in³	57.73	70.79	87.39	81.96	101.24	128.09	122.66	155.25	191.68
Actual shot weight - PS	grams	886	1087	1342	1259	1554	1967	1884	2385	2944
Actual shot weight - PS	oz	31.3	38.4	47.4	44.4	54.8	69.4	66.4	84.1	103.8
Calculated Plasticizing Capacity - PS	g/s	63	78	103	69	92	125	82	113	154
Injection pressure-Max.	Psi	28275	23041	18674	28716	23254	18376	32030	25302	20495
Injection Rate	in³/sec	26.54	32.58	40.21	26.11	32.28	40.82	26.79	33.87	41.86
Injection speed	in/sec	5.15			4.13			3.42
Screw diameter	in	2.56	2.83	3.15	2.83	3.15	3.54	3.15	3.53	3.94
Screw L/D ratio ※(1)		23	21	19	22	20	18	23	20.5	18.5
Max. Theoretical screw torque	N.m	3668			4536			4942
Screw speed	rpm	225			182			167
Screw stroke	in	11.22			12.99			15.74
Nozzle stroke	in	20.86			20.86			20.86
Nozzle contact force	U.S ton	11.9			11.9			11.9
Temperature control zones	No.	5			5			6
Total heating wattage	Kw	26			30			32
Clamping Unit
Clamping force	U.S ton	606			606			606
Clamp stroke-Max.	in	33.46			33.46			33.46
Open daylight-Max.	in	70.86			70.86			70.86
Mold thickness (Min-Max.)	in	11.8 - 37.4			11.8 - 37.4			11.8 - 37.4
Platen dimension (H×V)	in	49.6 × 49.6			49.6 × 49.6			49.6 × 49.6
Tie-bar distance(H×V)	in	33.4 × 33.4			33.4 × 33.4			33.4 × 33.4
Ejector stroke	in	8.6			8.6			8.6
Ejector force	U.S ton	12.1			12.1			12.1
Dry cycle time	sec	4.5			4.5			4.5
General
Motor power (Standard)	HP(Kw)	75(55.9)			75(55.9)			75(55.9)
Servo motor power (ES Option) Max. Flow	Kw	15 + 18 + 22.5			15 + 18 + 22.5			15 + 18 + 22.5
Oil tank capacity (Standard)	L	960			960			1100
Oil tank capacity (ES system Option)	L	750			750			700
Hydraulic sys. pressure	Psi	1991			1991			1991
Machine Weight	U.S ton	30.3			30.3			30.3
Machine dimensions (Standard)	in	365.7×84.6×102.2			365.7×84.6×102.2			365.7×84.6×102.2
Machine dimensions (ES System option)	in	379.9×84.6×102.2			379.9×84.6×102.2			379.9×84.6×102.2
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-700N			VR-700P			VR-700R
Injection Unit
Calculated injection capacity	in³	57.73	70.79	87.39	81.96	101.24	128.09	122.66	155.25	191.68
Actual shot weight - PS	grams	886	1087	1342	1259	1554	1967	1884	2385	2944
Actual shot weight - PS	oz	31.3	38.4	47.4	44.4	54.8	69.4	66.4	84.1	103.8
Calculated Plasticizing Capacity - PS	g/s	63	78	103	69	92	125	82	113	154
Injection pressure-Max.	Psi	28275	23041	18674	28716	23254	18376	32030	25302	20495
Injection Rate	in³/sec	26.54	32.58	40.21	26.11	32.28	40.82	26.79	33.87	41.86
Injection speed	in/sec	5.15			4.13			3.42
Screw diameter	in	2.56	2.83	3.15	2.83	3.15	3.54	3.15	3.54	3.94
Screw L/D ratio ※(1)		23	21	19	22	20	18	23	20.5	18.5
Max. Theoretical screw torque	N.m	3668			4536			4942
Screw speed	rpm	225			182			167
Screw stroke	in	11.22			12.99			15.74
Nozzle stroke	in	20.86			20.86			20.86
Nozzle contact force	U.S ton	11.9			11.9			11.9
Temperature control zones	No.	5			5			6
Total heating wattage	Kw	26			30			32
Clamping Unit
Clamping force	U.S ton	771			771			771
Clamp stroke-Max.	in	36.61			36.61			36.61
Open daylight-Max.	in	75.98			75.98			75.98
Mold thickness (Min-Max.)	in	15.7 ~ 39.3			15.7 ~ 39.3			15.7 ~ 39.3
Platen dimension (H×V)	in	57.5 X 56.9			57.5 X 56.9			57.5 X 56.9
Tie-bar distance(H×V)	in	37.8 x 37.8			37.8 x 37.8			37.8 x 37.8
Ejector stroke	in	10.23			10.23			10.23
Ejector force	U.S ton	16.5			16.5			16.5
Dry cycle time	sec	5.5			5.5			5.5
General
Motor power (Standard)	HP(Kw)	75(55.9)			75(55.9)			75(55.9)
Servo motor power (ES Option) Max. Flow	Kw	15 + 18 + 22.5			15 + 18 + 22.5			15 + 18 + 22.5
Oil tank capacity (Standard)	L	910			910			910
Oil tank capacity (ES system Option)	L	910			910			910
Hydraulic sys. pressure	Psi	1991			1991			1991
Machine Weight	U.S ton	35.8			36.7			37.3
Machine dimensions (Standard)	in	391.2x90.2x102.4			391.2x90.2x102.4			391.2x90.2x102.4
Machine dimensions (ES System option)	in	391.2x90.2x102.4			391.2x90.2x102.4			391.2x90.2x102.4
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-850P			VR-850R			VR-850S
Injection Unit
Calculated injection capacity	in³	81.96	101.24	128.09	122.66	155.25	191.68	182.47	225.25	272.54
Actual shot weight - PS	grams	1259	1554	1967	1884	2385	2944	2802	3459	4186
Actual shot weight - PS	oz	44.4	54.8	69.4	66.4	84.1	103.8	98.9	122	147.6
Calculated Plasticizing Capacity - PS	g/s	90	119	162	107	146	200	98	129	165
Injection pressure-Max.	Psi	28716	23254	18376	32030	25032	20495	29982	24278	20068
Injection Rate	in³/sec	33.99	41.98	53.15	34.84	44.06	54.43	32.58	40.21	48.7
Injection speed	in/sec	5.39			4.44			3.26
Screw diameter	in	2.83	3.15	3.54	3.15	3.54	3.94	3.54	3.94	4.33
Screw L/D ratio ※(1)		22	20	18	23	20.5	18.5	22	20	18
Max. Theoretical screw torque	N.m	4536			4942			7140
Screw speed	rpm	237			217			146
Screw stroke	in	12.99			15.74			18.5
Nozzle stroke	in	20.86			20.86			27.55
Nozzle contact force	U.S ton	11.9			11.9			13.77
Temperature control zones	No.	5			6			7
Total heating wattage	Kw	30			32			52
Clamping Unit
Clamping force	U.S ton	936			936			936
Clamp stroke-Max.	in	39.37			39.37			39.37
Open daylight-Max.	in	82.68			82.68			82.68
Mold thickness (Min-Max.)	in	17.7 ~ 43.3			17.7 ~ 43.3			17.7 ~ 43.3
Platen dimension (H×V)	in	59.1 X 59.1			59.1 X 59.1			59.1 X 59.1
Tie-bar distance(H×V)	in	43.3 X 39.4			43.3 X 39.4			43.3 X 39.4
Ejector stroke	in	10.23			10.23			10.23
Ejector force	U.S ton	19.8			19.8			19.8
Dry cycle time	sec	6.1			6.1			6.1
General
Motor power (Standard)	HP(Kw)	100(74.6)			100(74.6)			100(74.6)
Servo motor power (ES Option) Max. Flow	Kw	18 + 18 + 18 + 18			18 + 18 + 18 + 18			18+18+18+18
Oil tank capacity (Standard)	L	1160			1160			1160
Oil tank capacity (ES system Option)	L	1160			1160			1160
Hydraulic sys. pressure	Psi	1991			1991			1991
Machine Weight	U.S ton	39.2			41.1			44.9
Machine dimensions (Standard)	in	425.7x98.4x106.4			425.7x98.4x106.4			10812x2500x2703
Machine dimensions (ES System option)	in	425.7x98.4x106.4			425.7x98.4x106.4			10812x2500x2703
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-1000R			VR-1000S			VR-1000J
Injection Unit
Calculated injection capacity	in³	122.67	155.25	191.69	182.47	225.25	272.55	263.58	318.93	379.59
Actual shot weight - PS	grams	1793	2270	2802	2840	3506	4243	4103	4964	5909
Actual shot weight - PS	oz	63	80	98.8	100	124	150	144.7	175.1	208.4
Calculated Plasticizing Capacity - PS	g/s	134	183	251	122	162	206	111	142	196
Injection pressure-Max.	Psi	28033	22145	17949	29982	24278	20068	30579	25274	21234
Injection Rate	in³/sec	44.1	55.9	69	41.3	51	61.7	40.5	49	67
Injection speed	in/sec	5.55			4.09			3.3
Screw diameter	in	3.14	3.54	3.93	3.54	3.93	4.33	3.93	4.33	4.72
Screw L/D ratio ※(1)		22	20	18	22	20	18	22	20	18
Max. Theoretical screw torque	N.m	4942			7140			8649
Screw speed	rpm	220			188			150
Screw stroke	in	15.7			18.5			21.6
Nozzle stroke	in	20.86			27.55			33.46
Nozzle contact force	U.S ton	11.9			13.7			16.5
Temperature control zones	No.	6			7			7
Total heating wattage	Kw	32			52			65
Clamping Unit
Clamping force	U.S ton	1102.3			1102.3			1102.3
Clamp stroke-Max.	in	47.24			47.24			47.24
Open daylight-Max.	in	94.48			94.48			94.48
Mold thickness (Min-Max.)	in	19.68-47.24			19.68-47.24			19.68-47.24
Platen dimension (H×V)	in	71.7x67.5			71.7x67.5			71.7x67.5
Tie-bar distance(H×V)	in	49.21x43.3			49.21x43.3			49.21x43.3
Ejector stroke	in	11.81			11.81			11.81
Ejector force	U.S ton	25.35			25.35			25.35
Dry cycle time	sec	7.3			7.3			7.3
General
Motor power (Standard)	HP(Kw)	120(89.5)			120(89.5)			120(89.5)
Servo motor power (ES Option) Max. Flow	Kw	18+18+18+18+18			18+18+18+18+18			18+18+18+18+18
Oil tank capacity (Standard)	L	1800			1800			1800
Oil tank capacity (ES system Option)	L	1532			1530			1530
Hydraulic sys. pressure	Psi	1991			1991			1991
Machine Weight	U.S ton	61.7			62.8			64.8
Machine dimensions (Standard)	in	507x138x121			507x138x121			507x138x121
Machine dimensions (ES System option)	in	507x138x121			507x138x121			507x138x121
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(20), 20(22), 22(*24)) Optional special for houshold produce.

Model		VR-1300S			VR-1300J			VR-1300B
Injection Unit
Calculated injection capacity	in³	182.47	225.25	272.55	263.58	318.93	379.59	347.92	414.07	485.96
Actual shot weight - PS	grams	2840	3506	4243	4103	4964	5909	5416	6445	7564
Actual shot weight - PS	oz	100	124	150	144.7	175.1	208.4	191	227.3	266.8
Calculated Plasticizing Capacity - PS	g/s	145	191	244	132	168	232	148	183	227
Injection pressure-Max.	Psi	29982	24278	20068	30579	25274	21234	29654	24918	21234
Injection Rate	in³/sec	47.2	58.3	70.6	46.3	56	66.7	47.7	56.8	66.7
Injection speed	in/sec	4.76			3.77			3.22
Screw diameter	in	3.54	3.93	4.33	3.93	4.33	4.72	4.33	4.72	5.11
Screw L/D ratio ※(1)		22	20	18	22	20	18	22	20	18
Max. Theoretical screw torque	N.m	7140			8694			10290
Screw speed	rpm	200			180			150
Screw stroke	in	18.5			21.6			23.6
Nozzle stroke	in	27.55			33.46			42.52
Nozzle contact force	U.S ton	13.7			16.5			16.5
Temperature control zones	No.	7			7			8
Total heating wattage	Kw	52			65			77
Clamping Unit
Clamping force	U.S ton	1432.99			1432.99			1432.99
Clamp stroke-Max.	in	51.18			51.18			51.18
Open daylight-Max.	in	102.36			102.36			102.36
Mold thickness (Min-Max.)	in	21.65-51.18			21.65-51.18			21.65-51.18
Platen dimension (H×V)	in	78x75			78x75			78x75
Tie-bar distance(H×V)	in	52x50			52x50			52x50
Ejector stroke	in	12.99			12.99			12.99
Ejector force	U.S ton	28.65			28.65			28.65
Dry cycle time	sec	8.1			8.1			8.1
General
Motor power (Standard)	HP(Kw)	150(111.9)			150(111.9)			150(111.9)
Servo motor power (ES Option) Max. Flow	Kw	18+18+18+18+18+18			18+18+18+18+18+18			18+18+18+18+18+18
Oil tank capacity (Standard)	L	2100			2100			2100
Oil tank capacity (ES system Option)	L	1750			1750			1750
Hydraulic sys. pressure	Psi	1991			1991			1991
Machine Weight	U.S ton	79.3			81.2			84.2
Machine dimensions (Standard)	in	572x153x127			572x153x127			572x153x127
Machine dimensions (ES System option)	in	572x153x127			572x153x127			572x153x127
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.