Model |
VsP-180 |
|||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Injection Unit | ||||||||||||||||||||||
Injection unit size | G | F | ||||||||||||||||||||
Screw Diameter | mm | 36 | 40 | 46 | 46 | 50 | 55 | |||||||||||||||
Calculated Injection Capacity | com3 | 163 | 201 | 266 | 332 | 393 | 475 | |||||||||||||||
Actual Shot weight-PS | g | 153 | 188 | 249 | 312 | 368 | 445 | |||||||||||||||
oz | 5.4 | 6.6 | 8.8 | 11.0 | 13.0 | 15.7 | ||||||||||||||||
Actual Plasticzing Capacity-PS | g/s | 20.55 | 27.50 | 40.27 | 26.94 | 33.61 | 41.66 | |||||||||||||||
Actual Plasticzing Capacity-PS | kg/hr | 74.00 | 99.00 | 145.00 | 97.00 | 121.00 | 150.00 | |||||||||||||||
Injection Pressure-Max. | kgf/com2 | 2428 | 1967 | 1487 | 2250 | 1904 | 1574 | |||||||||||||||
Injection rate | com3/sec | 181 | 224 | 296 | 195 | 231 | 279 | |||||||||||||||
Calculated Injection Speed-Max. | mm/sec | 178 | 118 | |||||||||||||||||||
L/D ratio | 22.2 | 20 | 17.4 | 21.7 | 20 | 18.2 | ||||||||||||||||
Screw Speed | rpm | 391 | 261 | |||||||||||||||||||
Screw stroke | mm | 160 | 200 | |||||||||||||||||||
Calculated Nozzle contact force | ton | 5 | 5 | |||||||||||||||||||
Total Heating wattage | kw | 13.9 | 22.6 | |||||||||||||||||||
Clamping unit | ||||||||||||||||||||||
Clamping Force | ton | 180 | ||||||||||||||||||||
Tie-Bar distance (HxV) | mm | 510 x 510 | ||||||||||||||||||||
thickness Min. - Max. | mm | 200 - 550 | ||||||||||||||||||||
Clamp stroke-Max. | mm | 470 | ||||||||||||||||||||
Open daylight-Max. | mm | 1020 | ||||||||||||||||||||
Platen dimensions (HxV) | mm | 750 x 724 | ||||||||||||||||||||
Ejector stroke | mm | 140 | ||||||||||||||||||||
Ejector force | ton | 5.6 | ||||||||||||||||||||
Dry. Cycle time | sec. | 3.3 | ||||||||||||||||||||
General | ||||||||||||||||||||||
Motor (Standard) | HP/ (Kw) | 40 / (30) | ||||||||||||||||||||
Servo Motor Pump (ES Option) | kw | 20(M)/37(D) | ||||||||||||||||||||
Oil tank capacity | l | 280 | ||||||||||||||||||||
Hydraulic sys. Pressure | kgf/com2 | 170 | ||||||||||||||||||||
Machine weight | ton | 5.4 | ||||||||||||||||||||
Machine size (LxWxH) | mm | 5268 x 1487 x 2289 | ||||||||||||||||||||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model |
VsP-180 |
|||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Injection Unit | ||||||||||||||||||||||
Injection unit size | G | F | ||||||||||||||||||||
Screw Diameter | in | 14.1 | 1.57 | 1.81 | 1.81 | 1.96 | 2.16 | |||||||||||||||
Calculated Injection Capacity | in³ | 9.94 | 12.2 | 16.2 | 20.2 | 23.9 | 28.9 | |||||||||||||||
Actual Shot weight-PS | g | 153 | 188 | 249 | 312 | 368 | 445 | |||||||||||||||
oz | 5.4 | 6.6 | 8.8 | 11.0 | 13.0 | 15.7 | ||||||||||||||||
Actual Plasticzing Capacity-PS | g/s | 20.55 | 27.50 | 40.27 | 26.94 | 33.61 | 41.66 | |||||||||||||||
Actual Plasticzing Capacity-PS | kg/hr | 74.00 | 99.00 | 145.00 | 97.00 | 121.00 | 150.00 | |||||||||||||||
Injection Pressure-Max. | Psi | 30991 | 27976 | 21149 | 32001 | 27080 | 22387 | |||||||||||||||
Injection rate | in³/sec | 11.04 | 13.67 | 18.06 | 11.90 | 14.09 | 17.02 | |||||||||||||||
Calculated Injection Speed-Max. | in/sec | 7 | 4.64 | |||||||||||||||||||
L/D ratio | 22.2 | 20 | 17.4 | 21.7 | 20 | 18.2 | ||||||||||||||||
Screw Speed | rpm | 391 | 261 | |||||||||||||||||||
Screw stroke | in | 6.299 | 7.874 | |||||||||||||||||||
Calculated Nozzle contact force | U.S. ton | 5.5 | 5.5 | |||||||||||||||||||
Total Heating wattage | kw | 13.9 | 22.6 | |||||||||||||||||||
Clamping unit | ||||||||||||||||||||||
Clamping Force | U.S. ton | 198.4 | ||||||||||||||||||||
Tie-Bar distance (HxV) | in | 20 x 20 | ||||||||||||||||||||
Mold thickness Min. - Max. | in | 7.87 - 21.65 | ||||||||||||||||||||
Clamp stroke-Max. | in | 18.503 | ||||||||||||||||||||
Open daylight-Max. | in | 40.157 | ||||||||||||||||||||
Platen dimensions (HxV) | in | 29.52 x 28.5 | ||||||||||||||||||||
Ejector stroke | in | 5.511 | ||||||||||||||||||||
Ejector force | U.S. ton | 6.172 | ||||||||||||||||||||
Dry. Cycle time | sec. | 3.3 | ||||||||||||||||||||
General | ||||||||||||||||||||||
Motor (Standard) | HP/ (kw) | 40 / (30) | ||||||||||||||||||||
Servo Motor Pump (YUKEN ES) | kw | 20(M)/37(D) | ||||||||||||||||||||
Oil tank capacity | L | 245 | ||||||||||||||||||||
Hydraulic sys. Pressure | Psi | 2417 | ||||||||||||||||||||
Machine weight | U.S. ton | 5.952 | ||||||||||||||||||||
Machine size (LxWxH) | in | 207.4 x 58.54 x 90.11 | ||||||||||||||||||||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |